86-577-80339888

News

Operating Procedures of Automatic Folder Gluer

Author : Site EditorPublish Time :

The working principle of the automatic folder gluer: After the power is turned on, the entire conveyor belt starts to move, and the die-cut semi-finished carton is placed in the paper feeding position of the folder gluer. The conveyor belt automatically moves the single box pieces according to the paper stop head frame. The set paper feeding report is sent to the middle belt (if the semi-finished carton is coated or polished and other surface treatments, after entering the middle, the corresponding carton can be glued on the inner edge by the glue gun at the same time) The conveyor belt will transport the carton to The post-gluing part is pressurized and packed.

Operating Procedures of Automatic Folder Gluer:

1. Carefully check the work order, samples, determine the box glue used, and prepare them.

2. Adjust the width of the baffle to be pasted, the two sides should be parallel, and the semi-finished color box to be produced has just been put down, and the side baffles on both sides are less than 1mm away from the color box, and then adjust the limit bolts to ensure that each product to be pasted passes smoothly And the phenomenon of no fetters appears.

3. Adjust the slope and height of the bracket in the box to be glued area, so that the product to be glued can move forward smoothly without fetters, and adjust the auxiliary guide rail and flow wheel after pressing. Make it suitable for the size of the color box to be pasted.

4. Adjust the box-gluing belt and the box-gluing guide, and then adjust the pressure of the box-gluing host and the wheel, and cross-fit with the belt.

5. Adjust the glue tank, and check whether the glue in the glue tank is sufficient, the amount of glue should be immersed 80% of the rubber wheel, and then adjust the glue tank and glue position.

6. Turn on the power switch, the main motor switch and the vibration switch. After the machine is adjusted, press the "Run" or "Inch" key, and then press the "Paper" key to debug the machine, and check whether the machine performance is abnormal. Skew phenomena should be corrected immediately.

7. After debugging ok, first test 5-10 sheets, confirm the position and molding specifications, and then debug the machine speed.

8. When gluing the box, pay attention to the paper feeding state of the box, not over-line, offline or misplaced, so as not to affect the appearance and molding effect of the color box.

9. First confirmation: strictly in accordance with the first sample signing method.

10. After production, clean up the machine and keep it clean.

Company Profile

Zhejiang New Luolan Machinery Co., Ltd, whose previous name is Ruian Gaoke Machinery, is established in 2006. As a professional manufacturer, we not only do manufacturing, but also researching, marketing and offering after sales service. We supply quality equipments, effective and convenient solutions for cardboard box and corrugated box folding industry, printing and packaging industry. Gluing folding machine and window patching machine which produced by Zhejiang New Luolan Machinery Co., Ltd have approved by the National Quality Supervision and inspection.

Phone: +86 577 80339888
Fax: +86 577 80339889
Email: ragaoke@163.com

Related News